SKYMOKLEEN 737TM will remove 99+% of organic and inorganic soils found in industrial surfaces cleaning from below the Substrate.

Do Not Dilute ~ used directly from the container SKYMOKLEEN 737TM may be filtered and reused (x) times depending on the filter and the type of soil being removed. Safe on all Industrial Finishes and all Industrial Plastics.

Will Not Stain, Discolor or Pit: Aluminum, Titanium, Stainless Steels (300 and 400 series) Brass, Copper, Naval Bronze, Gold or Silver. Safe on all Industrial Ceramics. Will no blister properly cured industrial finishes.

SKYMOKLEEN™ PMC is very effective at cleaning very tenacious synthetic oils and fine contaminants from precision mechanisms. It is an extremely fast evaporator and leaves no detectable residue. May be applied by dip tube shop air gun or by hand with a lint free wipe or a natural bristle brush.

SKYMOKLEEN™ PMC can be disposed of without special handling. Safe on all metals and the environment.

Will Not Stain, Discolor or Pit: Aluminum, Titanium, Stainless Steels (300 and 400 series) Brass, Copper, Naval Bronze, Gold or Silver. Safe on all Industrial Ceramics

Stainless steels retain their unique properties by forming oxides to protect the surface. Over time, these oxides build up and trap soils of all types; oils, pollen, dust and other airborne pollutants. A quick surface cleaning does not remove the oxides so the surface now “looks” clean. The specialty cleaners that remove the oxides leave behind a clean but dull surface.

The manufacturers then add an oil, either mineral oil or silicone oil, to give the surface a bright finish. However, the oil itself traps soils and especially the residue on fingers, which is why fingerprints seem to always show. SKYMOKLEEN™ XCP’s unique formulation contains NO OILS. It chemically produces the “shine” and keeps the substrate clean for a much longer time period.

SKYMOKLEEN TM 626 is safe to use on all plastics used in the Health Care, Medical Device and Food Service industries, as well as carbon steel, stainless Steel, titanium, copper, gold, silver or aluminum.

SKYMOKLEEN TM 626 is free from chlorinated solvents, terpines, butyls, d’limones, and all other environmentally unsound materials. It is perfume and dye free and has a neutral pH. Repeated exposure will not harm your skin.

SKYMOKLEEN TM 626 leaves no residue and will not stain natural or synthetic fabrics.

SKYMOKLEEN FC1 will not harm properly applied hangar floor coatings or fully cured cement. It will rapidly and safely remove common floor soils as well as hydraulic fluids (Skydrol, etc.) Engine oils (Synthetic or organic), most adhesive drippings, rubber tire marking and uncured paint splatter. It is completely safe with neutral PH of 7 and is biodegradable.